|Lengte over alles||12.17 m|
|Lengte bij waterlijn||12.19 m|
|Max diepgang||3 m|
|Min. diepgang||3 m|
|Aandrijving typ||Sail drive|
|Zoetwater reservoirs||48 Liters|
From the board of Marc Lombard and uild by MC-TEC, this 2009 Akilarai RC1 Class 40 is a very rapid water ballast race boat with carbon rig, bowsprit, 3m T-shaped keel plus twin rudders. Fully spec’d and ready to go.
FURTHER BROKER’S COMMENTS:
MUEYU has been well maintained and provides a fantastic opportunity for those seeking some adrenalin fuelled racing or with the addition of a few creature comforts added, some equally exciting cruising. She’s designed to be easily short-handed with her water ballast and an asymmetrical kite flown from the carbon bowsprit and which would her ideal for either a quick blast around the cans or for the more adventurous, some serious off-shore high speed sailing. Class rules forbid the use of canting keels or "exotic" materials in the construction, which serves to keep the cost down whilst maintaining the excitement. Having been designed by the renowned Marc Lombard Yacht Design Group, being known for his Open 60’s “Sill” and “Bouduelle,” there has clearly been no shortage experience and expertise in the creation of these boats. The boat was built by MC-TEC, a company of builders formerly with maxi-boat builder Wally Yachts. In a purpose-built, high-tech factory on the coast of Tunisia, Akilarias are built using industrial female moulds and the SCRIMP vinylester resin infusion moulded sandwich construction technique.
Her specification highlights include:
- Full sail wardrobe of race sails.
- Carbon mast, with aluminium spreaders.
- Matching carbon boom and bowsprit.
- Vacuum bagged epoxy E-Glass foam/balsa sandwich construction.
- Hull stripped and epoxy primed.
- Deck non-slip resprayed.
- Mast, boom, and pole, resprayed.
- Water ballast tanks.
- T-shaped 3m fin keel with a lead bulb.
- Keel removed for testing and refitted.
- Twin rudders with twin tiller steering.
- Watt & Sea hydro generator.
- Furuno radar.
- Furuno GPS.
- 2x autopilots
- Replacement batteries.
- Nanni N3.30 29hp Diesel engine with folding propeller.
- Roller furler headsail.
- NKE True Wind indicator.
- VHF Radio with DSC.
- NKE AIS system with radio receiver and 2x crew transmitters.
- Gas burner stove.
- Sink with mixer tap.
- 2x single berths each with a lee-cloth.
- 1x manual flush marine toilet.
- Kenwood radio/CD stereo with cabin a cockpit speakers.
- Balmar Max Charge alternator regulator.
The "Class 40" has exploded in Europe and is rapidly gaining attention here in North America. SAIL Magazine named the Akilaria Class 40 one of its “Best Boats 2008” with an award for "Innovation in a Performance Boat". It's a fast, easy-to-sail boat -available with a full cruising interior or as a minimalist racer- with a fixed keel, twin rudders, water ballast, open cockpit, carbon rig and retractable carbon pole for asymmetrical kites. Class rules forbid the use of canting keels or "exotic" materials in construction, which serves to keep the cost down and provide maximum "bang for the buck" to sailors.
“Here is another Class 40 design. This time the designer is Marc Lombard. The Akilaria is built as a stock, production boat and available in both "standard" and "race" versions. I assume that there is a difference in the two versions in the interior accommodation, but I do not have interior drawings for the standard version. From the specs the race version has a more exotic deck layout, more complex electronics package and a carbon boom.
We have already discussed the why of chines in the Antrim review. The Lombard design also has chines aft but I see no indication of a forward chine below the DWL. The sectional shape at the transom is very similar to that of the Antrim boat but not quite so slack in the bilge. The design is also at the class limit for beam at 14 feet, 8 inches, and the transom beam is 93 percent of beam max. These boats are bizarre looking in plan view. They are so beamy and so broad aft, but there is a distinct difference between the two 40s in plan view. If you look at the deck plan of both boats, you will see the Antrim boat is much finer forward. At the deck, the half angle of "entry" for the Antrim boat is 20.5 degrees, while the Lombard boat is fuller at 26.5 degrees. One thing I noticed about both designs is that they both have rather attractive sheers for all-out racing boats. Most rules dictate minimum freeboards at certain locations, so sheers tend to be functions of the rule. The Class 40 rule is different. It gives an average freeboard of 1.1 meters. It's up to the designer to determine how he is going to get that average. The Akilaria has a very handsome sheer spring. Note that in both designs the mast is quite far aft. The rule dictates the max upwind sail area, mast height and prod length, but does not limit downwind sail area. So, it pays to have as big a foretriangle as possible so your spinnakers can be bigger. The Akilaria's asymmetrical chute is 2,052 square feet, while the Antrim has an asymmetric area of 1,889 square feet. By using the fat-head main shape the mainsail can be a more effective off-the-wind sail. If you took the fat head off the mainsail and added area to the jib you would be reducing the downwind sail area. The chain plates are right at the sheer and, in fact, are external. These designs are not about accommodations, they are about huge rigs and very carefully thought-out deck plans. The cross-linked twin rudders are small so they don't require long tillers. With the rudders well outboard the two tillers are also well outboard, making it easy for the driver to sit high on the weather side. The Antrim 40 has a single, centreline tiller. On centreline aft, between the two tillers, is a tall console where the mainsheet and traveller controls are located. Primary and secondary winches are located very close to the helmsman. Halyard winches flank the companionway hatch. I really like the jib sheeting arrangement on this design. It comes from the Volvo 60s. It uses three widely spaced pad eyes with blocks arranged in a triangle: two on the deck and one on the housetop. Control lines lead from these pad eyes to a titanium rig that the jib sheet passes through. This way you have total freedom of positioning the clew on the jib without any track at all. It's effective and it's very light. The Akilaria is built on the coast of Tunisia by MC-TEC. The hull, as per Class 40 rules, is low-tech with a balsa core and laid-up with the infusion method. The deck is PVC foam cored with hardwood inserts in high-load areas. Vinylester resin is used throughout. The keel fin is steel. Again, in keeping with the "no exotic materials" part of the rule, the rudders have solid stainless-steel stocks.
Sailing Magazine review by Robert H Perry 1st March 2009
Developed by ML naval architecture at the end of 2005, class 40 "Akilaria 40 " is the result of a thorough analysis of the potential for performance and constructive possibilities. The enormous database linked to the development of the 60 'open (viscous numerical simulation of the hulls) has allowed a hull shape that is a generation ahead. Constructed entirely in PVC and Balsa vinylester sandwich, the solidity / weight optimization is pushed to the maximum. The keel is made of steel "Weldox" and the lead bulb guarantee a maximum torque of the gauge for a boat weight close to the mini of the gauge. The 2006 / early 2007 season proved the perfect reliability of the construction and the enormous potential of the boat.
- RCD Status: The yacht meets the requirements of the EC Directive 94/25EC (Recreational Craft Directive) with Boat design category: A (Ocean).
Hull, Deck & Superstructure Construction:
- Sandwich construction with vinylester resin in female moulds.
- Balsa core in hull, PVC foam in deck all constructed using infusion process.
- Hardwood inserts in way of all hardware.
- Monolithic (solid glass) areas in way of sail drive, keel, rudder bearings, thru-hulls, crash box.
- Reserve buoyancy of 3 cubic meters of foam per Class 40 rules.
- Hull stripped and epoxy primed - 2014.
- Deck non-slip resprayed - 2014.
- Mast, boom, and pole resprayed - 2014.
Cockpit, Cabin Top, Cabin Sides, Transom, Internal Structures:
- Sandwich construction with vinylester resin, PVC foam and infusion process on all components.
- Grey coloured nonslip to side decks and foredeck area.
Keel & Rudder:
- Acier E 36 Structural Grade Steel – WELDOX 960 Rectangular box section fabricated steel blade faired to templates.
- Lead Bulb Design drawings, engineering specs, a detailed weld plan and post build ultrasound/ X-ray testing and full compliant report provided with each keel.
- Keel manufactured in France.
- Keel removed for testing and refitted - 2014.
- Two rudders with solid stainless-steel stocks as per class rules. Stock diameter is 49 mm.
- F16PH stainless steel.
- JP3 self-aligning water tight upper and lower rudder bearings.
- Rudder structural grid is built using 316L stainless steel, rudder blade foam is 250kg/m3 and built with glass and epoxy resin.
- Rudders are connected below deck with an aluminium tube.
Engine & gearbox:
- Nanni N3.30 Diesel 4-stroke 3-cylinder naturally aspirated diesel engine with mechanical indirect injection producing 29hp at 3,600rpm.
- Fresh water closed cooling with a heat exchanger and natural air intake.
- Sail drive gear box
- Single lever Spinlock throttle/gear control.
- Engine panel with key start and RPM gauge mounted below the oil pressure and water temp gauges.
- Alarms on engine panel.
- High quality marine exhaust hoses, pumps, filters, thru-hulls, exhaust ports, etc.
Propulsion & Steering:
- 2x tillers in cockpit; one to port and starboard.
- Gori racing folding propeller.
- 12vDC primary domestic system
- One Optima engine start battery – 2009.
- 4x Lifeline 100-amp hour Group 27 AGM batteries for house bank – 2018.
- Balmar digital, programmable regulator.
- Mastervolt battery monitor.
- Balmar Max Charge battery charger.
- Watt & Sea hydro generator
- 1x 12vDC 100Amp engine-mounted alternator.
- Balmar Max Charge alternator regulator
- 220v inverter.
- 12vDC sockets.
PLUMBING & GAS SYSTEMS
- 12vDC pressure system with pressure pump.
- Cold water supply to galley.
- 1x Manual bilge pump in cockpit.
- 1x Electric bilge pump with manual override at DC panel.
- 1x utility bilge pump with roaming hose.
- Gas locker to supply the single burner stove.
- 1x 88 litre Vetus diesel fuel tank with remote shut off.
- Deck fill.
- 48 litre Vetus fresh water tank.
Water Ballast Tanks:
- 1x 750 litre water ballast tank positioned to portside (conforming to the Class 40 Rules).
- 1x 750 litre water ballast tank positioned to starboard (conforming to the Class 40 Rules).
- 1x 268 litre aft tank.
- 1x 464 litre forward tank.
- Six watertight inspection hatches made by Henderson.
- Tanks are ﬁlled and or emptied via centreline SoFoMarin scoop and electric high-volume pump.
- The discharge and transfer are via gravity.
NAVIGATION & COMMUNICATION EQUIPMENT
- Furuno radar scanner with LCD display at chart table.
- Furuno GP-32 GPS.
- 3x NKE multi-graphic displays in cockpit
- 2x autopilots (one hydraulic arm has been replaced whilst the other has been refurbished) - 2009
- 2x helming compasses
- NKE True Wind transducer with display.
- 17” 12v DC Computer monitor and keyboard.
- AIS transponder.
- ICOM IC-M505 VHF Radio with DSC.
- Single bowl stainless steel sink with cold water tap over.
- Single burner gas stove.
- 1x manual flush marine heads.
- Kenwood Stereo CD/radio system with speakers in saloon and waterproof speakers in cockpit.
Summary of Accommodation:
- Aft cockpit layout with an “Open Boat Style” interior layout.
- Main cabin area combining galley/living area with the open access to the forepeak sail storage area and two sleeping pipe berths to the aft of the boat under the cockpit.
- Potential settee berths with lee-cloths in main cabin area with lockers at the fore and aft ends.
- Galley area positioned to the forward side of the navigation pod has a single burner gas stove, sink with tap and dropdown counter space with storage under.
- Marine Heads positioned to starboard aft of the main bulkhead
- Navigation station with upper and lower pod for instruments and computer.
- Angled chart table seat with cushion and with storage under.
- 4x electric fans.
- 2x 12 position electrical system breaker panels.
- 2x LED chart table lights.
- 2x DC outlets at the chart table.
- Manufactured by Lorima/ZSpars in France of pre-preg carbon and autoclaved.
- Mast is built in female tool.
- Mast is deck stepped with double swept back aluminium spreaders and running backstays.
- Mast is ﬁnished with clear coat polyurethane.
- Mainsail track is Antal with removable gate for square top mainsail.
- Shrouds and headstay are rod rigging, adjustable inner-forestay and running backstays are Kevlar.
- 3x Harken winches
- North 3Di Main - 2014.
- North 3Di Solent - 2014.
- North carbon Kevlar Staysail - 2014.
- North Pentex upwind Code-0 - 2014.
- North Pentex reaching Code-0 - 2014.
- North A2.
- North A5.
- Quantum carbon kevlar main.
- Quantum carbon kevlar solent.
- Quantum A2.
- Quantum A5.
- Fluoro orange heavy weather jib.
- Double wire guardrails with stainless steel stanchions.
- Walkthrough pulpit.
- Stainless steel pushpits.
- Adjustable stainless-steel foot rest to the port and starboard helm positions.
Anchoring & Mooring:
- 2x anchors with 150m of anchor chain.
- Fenders and warps.
General note on safety equipment: Any safety equipment such as life rafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owner’s specific needs.
- NKE AIS system with radio receiver and 2x crew transmitters.
- 3x 150N Lifejacket with safety harnesses.
- Fire extinguishers.
James McNeil t/a Grabau International offers the details of all vessels in good faith but cannot guarantee or warrant the accuracy of this information or warranty the condition of any vessel and the details do not constitute a part of any contract. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. All vessels are offered subject to prior sale, price change, or withdrawal without notice. James McNeil t/a Grabau International provides professional yacht conveyancing and legal transfer of title for all yachts as per the ABYA Code of Practice with all deposit payments and final balance payments processed through secure dedicated client accounts solely for that purpose. Dedicated client accounts provided by stakeholder Grabau International Limited are written in trust at Natwest Bank and we are fully insured.