|Locatie||Mattapoisett, Massachusetts, Verenigde Staten|
|Lengte over alles||12.14 m|
|Lengte bij waterlijn||8.69 m|
|Max diepgang||1.73 m|
|Totaal zeilopervlak||690 ft²|
|Brandstoftanks||1 x 35 gelling|
|Zoetwater reservoirs||3 x 80 gelling|
Currently, Envolee (Concordia #81) is currently on her mooring in Mattapoisett Harbor, Massachusetts and will be through the boatshow season. Built in 1960 by Abeking and Rasmussen Shipyard, Lemwerder, Germany she has been professionally maintained at Triad for over 25 years. Envolee presents herself in excellent and extremely sound condition. Cockpit meticulously rebuilt in 1991 at Triad. Recent work (2014/15) includes a new stern post, new mahogany deadwood, new lower planks port and starboard, with complete refastening (silicon bronze). Keel bolts replaced in 2002. The 30 HP Yanmar diesel was new in 2011 (low hours) with bronze folding two blade propeller. Rewired in 2015. Ulmer mainsail, mizzen and North head sail (on roller furling) in good condition. Raytheon instruments and Cetrek autopilot.
As a classic Concordia yawl Envolee, an outstanding example of C. Raymond Hunt's design, presents herself well for viewing with an excellent and continuing maintenance program and upgrades that are a fine testament to her ownership and full professional care and craftsmanship by Triad Boatworks. Stored indoors at Triad since 1988. Maintenance records and recent survey are available upon request.
Envolee (#81) was built in 1960 at Abeking and Rasmussen Shipyard, Lemwerder, Germany. A carvel planked hull with African Mahogany planks upon white oak stem (new 2015 at Triad), lower planks port and starboard also replaced in 2015; laminated 1 1/2 inch x 2 inch white oak frame and beams with silicon bronze fastenings. Keel bolts completely removed and replaced with stainless steel or bronze (where appropriate) in 2002. Full iron keel with bronze skeg and two bladed folding propeller set in rudder aperture. Mahogany rudder (new 1991). The superstructure is varnished mahogany with painted Dynel (synthetic fiber) over fir coach roof. The interior is bright finished raised knotty pine bulkheads with locust trim and painted fir overheads. The cabin sole is teak planking (original). The decks are natural solid teak planks over oak frames. Bronze stanchions with varnished teak toerails, handrails and trim. Tanks are Monel (nickel-copper alloy). Envolee is finished in white with green anti-fouling bottom paint.
Accommodations and layout.
Envolee has a distinctive, bright and well ventilated interior with comfortable berths for four. The forepeak has a sail bin and stowage forward, followed by two pipe berths with lockers beneath. The forward cabin has reading lights, mahogany overhead hatch providing ambient light and ventilation, and two round bronze opening ports forward. Next to port thru paneled locust door is the enclosed head with aft facing Imperial manual toilet (with deck pump out, and macerator for overboard discharge), vintage vanity, medicine cabinet, linen hamper, locker space and opening bronze portlight. To starboard across from the head are two hanging lockers.
The main cabin has the traditional and very comfortable Pullman/Concordia style berths port and starboard. These can be stowed out of sight to double as backrests for settees. There is a varnished cherry fixed drop leaf table just port of centerline, and a cast iron Concordia solid fuel cabin heater/stove is set forward and slightly to port in the main saloon which vents via Charley Noble. Outboard of the berths are shelves and slatted lockers. Headroom is 6'3" in main saloon. The cushions are corduroy and include back and side bolsters. Mattresses were replaced in 2012 and have seen little use since. Interior 12 volt lamps and brass oil lamps. The main saloon has a large varnished wood butterfly hatch aft of mainmast.
The teak sole can be easily removed for access to the bilge. The galley is aft to starboard with gimballed two burner CNG stove (new 2005) with lockers and shelving outboard. The Yanmar diesel engine (new in 2011) is located partly under bridge deck and partly under cockpit deck and is readily reached by removing the panels and covers. The engine box can serve as a galley station. To port there is the icebox, storage and the stainless steel galley sink with hot and cold pressured water. The galley benefits from the ambient light and ventilation provided from two opening portlights.
The companionway leads out to the self-bailing cockpit, finished in teak. The cockpit was completely and thoroughly rebuilt in 1991 (to an extent that the grain of the teak coamings are identical in form to each other). Edson pedestal and mahogany wheel. There is a spare stainless steel Destroyer wheel. 35 gallon Monel fuel tank in portside locker and starboard locker with engine controls, CNG tank and Cetrek autopilot. Aft lazerette for storage. The hot pressured water was extended to the head in 2002, and also to an outlet/cockpit shower in portside lazerette.
Sails & Rigging
Mast head rigged yawl, with varnished box sectioned Sitka spruce masts and booms. The mainmast is keel stepped upon a longitudinal oak beam. North mainsail (with lazy jacks), mizzen and North foresail with roller furling and club foot/jib boom. Stainless steel 10 x 19 wire standing rigging. Primary winches are a pair of self tailing Barient #28 bronze winches, secondaries are also self tailing Barient #28s, bronze halyard self tailing winches on mainmast. The mainsheet block and tackle traveler is located on the raised bridge deck. Bronze genoa track mounted on toe rail with sheet cars. Wooden blocks, varnished locust cleats. Dodger and bimini. Main and mizzen sail covers. Canvas hatch cover.
Deck, ground tackle and sundry equipment
Decks are teak over oak frames, solid locust cleats, bronze chocks, bronze stanchions and bases. Double lifelines, bronze bow pulpit. Bower is a 35lb CQR anchor with chain rode and nylon leader. Kedge anchor mounted on forward coach roof. Bronze custom anchor chock. Mahogany boathook, fenders, two bright oak fender boards, emergency tiller, 12 volt Rule 1500 bilge pump, Edson manual diaphragm bilge pump, searchlight, fire extinguishers (cockpit locker and forward cabin)
Electronics and navigational equipment
- Cetrek Autopilot (overhaul and or renovation required).
- Raytheon ST60 tridata: speed, depth, wind.
- 6" Wilfred White compass at binnacle
- Horizon Ram VHF radio below with cockpit mike.
- Chronometer and barometer
- Horn and ship's bell.
12 volt DC and 120 volt AC systems. Marine deep cycle batteries in mahogany battery box. Wiring upgraded in 2015 (copper stranded marine grade). DC circuit breaker panel adjacent to companionway. Navigational lights, 12 volt interior lights in main cabin, head and forepeak. 120 volt outlets below. Shore power cable. Batteries charged by engine alternator, with combiner allowing both house and engine batteries to be charged at same time .
Engine and mechanical
30 HP Yanmar 3YM30 diesel engine new in 2011 on oak stringers, closed freshwater cooling with heat-exchanger. Low hours. Great access to engine for routine checks and maintenance. Cruises in good form at 5.5 -6 knots with a top speed of over 7 knots, and as such she can ably deal with a contrary "Buzzard's Bay chop". Adjustable bronze stuffing box. Wheel steering (mahogany spoked wheel or stainless steel Destroyer wheel) with two blade folding propeller.
Envolee is a handsome example of the successful and elegant Concordia yawl. This is endorsed by marine surveyor's recent summary comments: "This classic Concordia yawl was found to be in overall very good condition for her age. It is obvious that ownership takes great pride in the vessel with an excellent maintenance program in place with all systems and appurtenances, including upholstery, engine and bilge spaces, fit and finish, in very fine condition" (Michael Collyer, Senior Marine Surveyor; March 2016).
She has had the same owner since 1981 and has been stored indoors for 29 years. She was launched and in the water for 3 days in October 2017 to swell planks, this was successfully achieved. The ngine was serviced at that time.
Stored indoors this off-season at Triad Boatworks (as she has been for 26 winters). In great shape, Envolee presents an outstanding opportunity to purchase, and be ready in short order for 2017.
Summary of significant work on Envolee.
- 1989 New rudder post
- 1990/91 Complete reconstruction of cockpit including rebuild of bridge deck. Included new backrests, mahogany seats/lazerettes and matching grain coamings. New Edson quadrant on rudder shaft. New engine box cover built with pine slots to retain original appearance.
- 2000 Wooded, refinished and painted all ceilings below. New mahogany battery box. New rudder.
- 2002 New keel bolts in stainless or bronze where appropriate. Extended hot and cold pressured water to head and to cockpit shower.
- 2011 New 30 HP Yanmar diesel engine.
- 2014/15 New stern post, mahogany deadwood, lower planking and complete refastening in silicon bronze. Rewiring.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.